Introducing the FEND-ALL® Family of Dock Fenders

Offered in four styles - vertical, horizontal, floating dock, and small boat. The FEND-ALL® Family of Fenders are the only continuously supported, double-wall fenders available on the market with an "internal high-energy absorption web" capable of 250+% extension before breakage. This combined with a special UV stabilized material will make the FEND-ALL® Family of Fenders the standard bearer for all marine fenders.

The revolutionary FA300 vertical or horizontal corner fender has been very popular with marinas that have floating fuel docks and high volume transient docks for its durability and resiliency.

The FA201 is rapidly becoming the standard for floating docks that handle larger vessels due to its unique patented design, durability, and strength.

These two fenders were quickly and successfully brought to market through the design, testing, and development stages, and passed with flying colors. The main, and most popular, fender in the FEND-ALL® Family of Fenders, the FA has produced results beyond design expectations.

The FEND-ALL® Family of Fenders are made of a polyvinyl chloride (PVC) called GEON C9000. The fenders are extruded from virgin material and have a life expectancy of 10+ years.

The FA is available in standard lengths of 6, 8, 10, and 12 feet, mounted or unmounted. Mounted fenders are fastened with 316 stainless steel ringshank nails on recycled plastic lumber, 2x4's or 4x4's. Available colors are black, white, or gray. The FA, with its internal high-energy absorption web, is designed primarily for a vertical application to a piling or bulkhead, yet can also be mounted horizontally. Designed for vessels from tenders to large yachts.

The FA201 is available in a standard length of 10' and black or white in color. This fender is primarily intended for use on floating docks. With its larger dimensions, greater wall thickness, and internal high-energy absorption web, the FA201 can handle vessels much larger than the typical floating dock fender available on the market today.

The FA300 is a revolutionary design in corner fenders, both vertical and horizontal. Used primarily to protect vessels from sharp protruding corners or bulkheads. As with it's cousins, FA and FA201, the FA300, with it's internal high-energy absorption web can handle a variety of different size vessels. Available in 10' lengths or increments of 2 feet, black or white in color.

The FA50 is intended for use in the small boat market, up to 30', or in areas where a lower profile fender is necessary due to space restrictions for slightly larger vessels. This is possible due to the internal high-energy absorption web. Available in a standard length of 10', and black or white in color.

The FA400 with the same patented design as its siblings, is your answer for maximum protection in narrow slips with no need for special fasteners. The FA400 can be mounted directly to pilings, ranging from 8" to 14" diameter, using stainless steel full-annular ring shank nails.