Use CorrosionX to eliminate corrosion and protect all metal surfaces of your boat, trailer and dockside equipment. Especially recommended for brightwork (keeps stainless from pimpling), hatches, powerheads, antenna bases, hinges and latches.

CorrosionX is also the best lubricant you can use for maritime applications. It does not attract dust, outperforms lubricants fortified with Teflon* (PTFE), and due to it's unique polar bonding technology , CorrosionX repels water, and doesn't dissipate quickly or wash off in harsh saltwater environments. Use CorrosionX on throttle cables, steering mechanisms, seat swivels, locks, travelers, winches, pulleys, furling systems, tracks and on any other gear that would benefit from lubrication.

Due to its extraordinary dielectric properties, CorrosionX should be applied to all battery terminals, terminal strips, ignition switches, electrical connectors, circuit breakers, fuse holders, light switches, light sockets, electrical plugs, blower motors and fans to protect them from corrosion, extend their life and keep them working reliably. Although CorrosionX is inherently nonflammable, the environmentally-friendly propellant used in our aerosol cans is flammable. Please use caution when applying to electrical equipment. Before applying, make sure there is no current running though the system and that electrical motors are disconnected before applying.

6 oz Spray
$8.95

16 oz Spray
$16.95

12 oz Spray - $14.95

CorrosionX Heavy Duty is for super long-term protection against serious rust and corrosion assault. For those really tough jobs where you need the ultimate protection against moisture, the answer is new CorrosionX Heavy Duty. There is no other product like it on the market today. It is a high performance, thick-film version of CorrosionX. It was developed specifically to provide maximum protection against moisture intrusion and resulting rust and corrosion. Recommended for use on boat trailers by Field and Stream.
STOPS AND PREVENTS CORROSION AND RUST
CorrosionX Heavy Duty forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis. And then it seals moisture out. Unlike wax coatings, it will not dry out, stiffen or crack under stress. It will remain for hours on out drives, even while underway!

1 oz. Tube - $5.95

The best thing that's happened to your fishing reel since you took it out of the box! ReelX is the new, hi-tech, extreme-pressure lubricant that stops and prevents wear, corrosion and rust. It contains no wax, tar, silicone or other solids; So It Can't Gum-Up. Outperforms all other lubricants, displaces moisture, and WON'T HARM MONOFILIMENT.

• Improves Reel Performance
  
• Stops/Prevents Rust & Corrosion

Here's what Carroll Hagood, ranked among the top 100 bass pros in the world, has to say:
"I've tried them all, but ReelX is the best. Casts are longer, gears are quieter, smoother, and no more rust or corrosion."
Not Harmful To The Environment.

19 oz Bottle - $19.95

SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, RV, AIRPLANE & MOTORCYCLE
RejeX is a thin-film polymer coating designed to provide a high-release surface. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. It also makes graffiti easy to remove and can be applied to windshields to repel rain. It's easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months.
RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.
APPLICATION
RejeX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won't perform up to its potential. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.
Curing is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. It is very important to allow RejeX to cure for 12 hours after the haze has been wiped off . If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it has cured, the contaminants may interfere with the film, preventing the RejeX from achieving it's maximum performance and durability.

PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES
RejeX is not meant to be used on porous surfaces, highly oxidized painted surfaces, or to fill fine scratches. RejeX can be applied in multiple coats, allowing 8 hours curing time between coats for deeper color and greater depth of gloss. RejeX has a higher refractive index than waxes, so it produces richer, deeper looking colors and a lustrous long-lasting finish.
RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. There is no reason to wax over RejeX. RejeX leaves a shinier, longer-lasting finish than wax. and the wax can't adhere well to RejeX!